Here is a step-by-step guide on how to replace oil level sensor for Mercedes Benz.If you found you have a fail oil level sensor,just buy new one,then follow this guide to do it by yourself.
It will take you about 3 hours
Tool you need: 13mm wrench, 8mm socket, E10 Torx, extension, floor jack, jackstands, wheel chocks, safety glasses, torque wrench
And for more Benz project you can check here:Mercedes Benz Projects
Applies to: C350 (2007-14), SLK350 (2004-14), CLS350 (2004-14), CLK350 (2005-14), E350 (2005-14), S350 (2005-14), SL350 (2005-14), R350 (2006-14), ML350 (2006-14), Viano (2005-14), Sprinter (2006-14), CLC350 (2008-14), GLK350 (2008-12)
Procedures:
With the vehicle safely lifted and supported remove the rear engine/transmission cover by removing the six 8mm bolts(red and yellow arrows). The forward bolts also help hold the middle engine tray in place (yellow arrows).
Use 13mm socket and remove the drain plug and crush washer (red arrow).This bolt does not need a lot of toque but for some reason people really tend to over tighten the drain plug.Use care,as oil should be quite warm.
The flow of the oil will change as it starts to empty so don
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!