Skip to content
Menu
OBD2 Scanner Blog
  • Home
  • Car Diagnostic Tool
    • MB Star Diagnosis
    • BMW Diagnostic Tool
    • GM Tech2
    • Volvo Vocom Interface
  • OBD2 Code Scanner
    • VXDIAG
  • Tech Support
OBD2 Scanner Blog

How to Replace Air Oil Separator for Mercedes Benz

Posted on February 24, 2019 by VCDS

Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation

The air oil separator on the Benz can wear out and fail over time. Most of the time the gasket fails on the separator and starts leaking oil onto the head. If your separator is failing replacement is quick and easy.This article show a guide on how to replace Mercedes Benz air oil separator.

 

 

Applies to: C350 (2007-14), SLK350 (2004-14), CLS350 (2004-14), CLK350 (2005-14), E350 (2005-14), S350 (2005-14), SL350 (2005-14), R350 (2006-14), ML350 (2006-14), Viano (2005-14), Sprinter (2006-14), CLC350 (2008-14), GLK350 (2008-12)

 

Time: 1 hour

Tab: $15 to $45

Talent: 1

Tools: T10 Torx

 

Mercedes Benz Air Oil Separator Replacement:

First,you need to remove the engine cover and air intake ducts,for detail check this article I wrote before: How to Remove Benz C Class W204 Engine Cover

 

The air oil separator is located on the top front of the left valve cover (red arrow).The hose from the separator runs along beside the intake manifold and attaches to the top of the throttle body (yellow arrow).This hose gets dried out and brittle over time so when working with it use care.

How to Replace Air Oil Separator for Mercedes Benz

This photo illustrates the AOS (red arrow).Begine by using your hand and slipping the vacuum hose out from the mount on the side of the AOS (yellow arrow)

How to Replace Air Oil Separator for Mercedes Benz

Next use an E10 Torx and remove the three bolts (red arrows)

How to Replace Air Oil Separator for Mercedes Benz

Pull the AOS off the valve cover and gently separate the hose from the top of the AOS (red arrow).These hoses get very old and brittle so use care.

How to Replace Air Oil Separator for Mercedes Benz

With the separator off there is a direct hole into the valve train so make sure you plug it right away with a cloth or paper towel.If something falls in there you will have to remove the valve cover to get it out.

How to Replace Air Oil Separator for Mercedes Benz

If you have removed the separator for any other reason than replacement and are reinstalling it make sure to replace the gasket (red arrow).Installation is the reverse of removal.

Note:At this time the gasket is not available individually;check for availability when ordering.

How to Replace Air Oil Separator for Mercedes Benz

Done!

How useful was this post?

Click on a star to rate it!

Average rating / 5. Vote count:

This Post: How to Replace Air Oil Separator for Mercedes Benz From ChinaOBD2 Official Blog
Please keep this link if you copy the post!

Post navigation

Prev: Prev: Hino Diagnostic Explorer & Reprog Manager 3.1.6 Free Download
Next: Next: How to Replace Benz W204 Engine Oil Filter

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Recent Posts

  • Yanhua ACDP2 Program BMW G Chassis BDC2 All Keys Lost on Bench
  • Scania Truck ALM 000800 Interrupted LIN Communicatin Siren
  • BMW G Series BDC2 Module Virgin and Replacement by APPRO2
  • CG FC200 V1.2.9.2 Update: BMW Coolant Temperature Setting Added
  • Scania Truck ALM 000463 Motion and Inclination Detector,Calibration Fault

Recommend OBD2 Scanner

ME9.7 ECU Engine Computer ME9.7 ECU Engine ComputerTabScan T6PT3G Diagnosis VCI for Porsche Diagnostic Tool Porsche Diagnostic Tool

Recent Comments

  • amr on MAN EOL Flash File Editor + MAN Immo Calculator Free Download
  • Pasquale Greenwald on Jungheinrich ETM/V 10-12 Tightening Torque for Screwed Connection on Brake Systems
  • VCDS on Scania SDP3 2.53.1 Diagnosis & Programming Free Download
  • Crossley on What are the functions of Iprog+ Programmer?
  • Lukas on VAG EDC15 EDC16 IMMO OFF Software Free Download

Archives

Categories

  • BMW Diagnostic Tool
  • Car Diagnostic Tool
  • Key Cutting Machine
  • Key Programming Tool
  • MB Star Diagnosis
  • OBD2 Code Scanner
  • Tech Support
  • VXDIAG

Tags

adapter Auto Pick and Decoder Car Key Copy Car Key Programmer cat Code Reader diagnostic software ECU Chip Tunning ecu programmer Ford gm handy baby Handy Baby 2 Key Programmer Handy Baby II Key Programmer HEX V2 immo iprog key Key Pro key programmer laptop Launch lish LISHI new arrivals nexiq nexiq link diesel truck interface nexiq truck diagnostic NEXIQ USB Link OBD2 obdii original program Scania VCI smart VAG COM Cable VCDS VCDS Cable VCDS VAG COM Cable vci VW wholesale X-PROG Box X-PROG Box ECU Programmer XPROG-M

Hot Selling

  • ME 9.7 ECU Engine Computer
  • MINI VCI J2534
  • NCF29XX Programmer
  • ThinkTool Pros+

Links

  • China OBD2
  • EPS Foam Machine
  • Foxdiag
  • Сканер OBD2
©2025 OBD2 Scanner Blog | Powered by chinaobd2