There are two pieces that make up the ABS control unit: the Dynamic control module and the hydraulic control unit. This article will show you how to replace the dynamic ABS control module. The ABS control module gets signals from not only the braking system and wheel speed sensors but also the steering sensor and other sensor throughout the vehicle to work in tandem with the other stability control units.
And here are more topics about ABS project:ABS (Anti-lock Braking System) Trouble Repair
Applies to: C350 (2007-14), C180 (2007-14), C200 (2007-14), C230 (2007-14), C250 (2007-14), C280 (2007-14), C300 (2007-14), C320 (2007-14)
Time:1 hour
Tab:$650
Talent: 2
Tools: T20 Torx driver
Parts Required:New ABS control module
Hot Tip:Take care not to spill brake fluid
Performance Gain:Proper braking
Complementary Modification:Bleed the brakes
Benz ABS Dynamic Control Module Replacement Procedures:
There are two pieces that make up the ABS control unit:the dynamic control module(red arrow) and hydraulic control unit (yellow arrow).The two units are connected and located at the front of the engine
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!
