How to Repair Stud for YALE G807 ERP18VT Forklift

Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation

This instruction show you guide on how to repair stud YALE G807 ERP18VT forklift truck.Stud repair can be performed with the transaxle in stalled to the lift truck or removed.

 

Related Contents:

2023 Yale PC Service Tool 5.1 4.9 Free Download

Hyster PC Service Tool 2021 2018 v4.97 v4.93 Free Download

 

Procedures:

1.Remove drive tire and block lift truck frame to position transaxle at the same height and position as with drive tire installed.

• ERP15-20VT (ERP030-040VT) (G807)
• ERP16-20VF (ERP30-40VF) (A955)

2.Remove damaged stud using adjustable grip pliers.

3.If stud is sheared off:

a.Mark center of stud with a center punch and nylon faced hammer.

b.Drill into center of stud with a 3mm drill bit.

c.Drill hole larger with a 7mm drill bit.

d.Lightly tap an easy-out into hole in stud. Install tap wrench and unscrew stud from hub.

4.Run a thread tap (size M14 x 1.5) into stud hole to clean and repair any damaged threads.

5.Test threads with a thread plug gauge (size M14 x 1.5

This Post: How to Repair Stud for YALE G807 ERP18VT Forklift From ChinaOBD2 Official Blog
Please keep this link if you copy the post!