How to repair 2010 Volvo S80L Mileage by CG100 Prog III

Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation

CG100 Prog III repair mileage for 2010 Volvo S80L Operation Guide:

Step 1: Check the car type and car year, and obtain the car information from the VIN

Step 2: Record the original mileage on the dashboard. It’s 160886 KM.

Step 3: Remove the dashboard and check chip number.

Kilometers are stored in the chip: 9S12H256

Step 4: Connect CG100 software

Select Programmer>> 9S12H256

Step 5: Follow the Pin diagram in the software to connect CG100 and dashboard

Step 6: Read the original data, check if the km is the same as the dashboard km

Step 7: Write the target mileage 100910 KM manually or send data to tech support to modify.

Step 8: The new mileage is written successfully. Install the dashboard back to car, and all are ok.

This Post: How to repair 2010 Volvo S80L Mileage by CG100 Prog III From ChinaOBD2 Official Blog
Please keep this link if you copy the post!