This instruction show you guide on how to remove powerpack for Paccar AS Tronic lite 6AS1000 TO engine.
Related Contents:
DAF Davie XDc II Runtime 5.6.1 Software Free Download
2022 Paccar ESA Electronic Service Analyst 5.5 5.4 5.2 Free Download
ZF Testman Pro 10.5 Transmission Diagnostic Software Free Download
Procedures:
Remove screw 02.230
Remove screw 02.190
CAUTION
The powerpack must be cleaned before the connectors are removed. Contamination in the oil
circuit of the automation module may result in malfunctions and damage.
3 Do not unscrew, only loosen the pipe fittings on the powerpack.
4 Unscrew the pipe fittings on the transmission actuator.
CAUTION
Contamination in the oil circuit of the automation module may result in malfunctions and damage.
5 Close open pipe ends using plug 0637 510 050
CAUTION
Contamination in the oil circuit of the automation module may result in malfunctions and damage.
6 Close open transmission actuator connections using plug 0637 510 609.
7 Remove screw 68.150.
8 Remove clamp 68.180 and spacer bush 68.170.
9 Unscrew pipe 68.100.
10 Close open pipe ends using plug 0637 510 050.
11 Close open powerpack and clutch actuator connections using plug 0637 510 609.
12 Unscrew two screws 01.040 and 01.060.
13 Screw in two guide screws M8 (1) and (2).
14 Unscrew screws 01.030, 01.050 and 01.070 and remove together with bushes 01.150,
01.170.
15 Remove the powerpack 01.010.
16 Take off the bushes 01.160, 01.180.
17 Unscrew guide screws (1) and (2).
CAUTION
Contamination in the oil circuit of the automation module may result in malfunctions and damage.
18 Unscrew pipes 02.160, 02.170, 02.200, and 02.210 on the powerpack.
19 Close open pipe ends using plug 0637 510 050
20 Close open powerpack connections using plug 0637 510 609.
More repair cases for DAF truck,please refer to:DAF Truck Repair
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!