Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation
Here is the instruction show you guide on how to remove high pressure pump for CLAAS AXION 950 tractor.
Related Contents:
CLAAS CDS 7.5 Diagnostic Software 2021 2020 Free Download
CLAAS 4x CAN Diagnostic Interface
Claas WebTIC Offline Repair & Service 2024 2015 Free Download
Removing the high pressure pump
► Disconnect the “Y489” (1) fuel pressure solenoid valve.
► Unscrew and remove the rigid pipe (1).
► Remove the mounting bolt (2).
► Unscrew and remove the rigid pipe (1).
► Remove the brackets (2).
► Unscrew the rigid pipes (1).
► Unscrew and remove the rigid pipes (1).
► Remove the mounting bolts (1).
► Unscrew and remove the rigid pipe (2).
► Remove the three mounting bolts (1) from the high pressure pump.
► Remove the high pressure pump (2).
► Unscrew the nut (1).
► Remove the pinion (2).
More repair case for CLAAS,please refer to CLAAS Trouble Repair
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!