How to Remove BMW FRM Footwell Module

Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation

Here share the instruction of How to Remove BMW FRM Footwell Module. Sometime you need to Repair BMW FRM Module or for other purpose.Hope this article is helpful to you.

 

Some readers ask me for BMW FRM Dump bin file collection,here i you can download it here:
BMW FRM Dump Data File Download

Location of BMW FRM Footwell module:

The footwell module is located behind the plastic cover right next to the accelerator pedal.

 

How to Remove BMW FRM Footwell Module:

To remove this, You will need to remove the upper trim panels which hold the lights. I then removed the bonnet release handle and a second screw behind it.

Then I removed the trim covering the bottom of the door.

Don’t worry too much about leaving some of the clips in place, as they are easy to refit to the trim panel.

The trim covering the footwell module is held on by two trim clips. They should come off with a little bit of persuasion.

You will now have access to the footwell module.

Then you need to disconnect the connectors.

This Post: How to Remove BMW FRM Footwell Module From ChinaOBD2 Official Blog
Please keep this link if you copy the post!