How to Read/Write BMW EDC17CP02

Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation

Here comes a guide on how to read and write BMW EDC17CP02 by Ktag.Hope this article will give you some useful advice.

Tools you need for ECU remaping:

1. KtagHardware
2. A laptop installed Ktag software
3. LED BDM Frame(recommend)

 

Prepared steps for ECU reading and writing:

1.Remove the ECU from the vehicle(example:How to Remove ECU for Range Rover Sport)

2.Open the ECU(EDC16/EDC17/MED17 ECU Opening Guide)

3.Reconnect the ECU to the vehicle and start the engine, in order to make sure that it is still working and has not been damaged in the opening;

4.Disconnect

This Post: How to Read/Write BMW EDC17CP02 From ChinaOBD2 Official Blog
Please keep this link if you copy the post!