Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation

In this article, we will discuss how to use the OBDSTAR DC706 with ECM V30.07 software to clone Jeep and Fiat IAW 10GF ECMs on bench. This process requires the OBDSTAR P003 Adapter, a 12V power source, and a stable internet connection.
Part 1: OBDSTAR DC706 Clone Jeep IAW 10GF ECM
1. Connect the OBDSTAR DC706 unit to a 12V 2A charger and ensure it is connected to the internet.
2. Select ECU Flasher>> ECM>> ECM V30.07>> Brand>> Quick search JEEP in the search box>> JEEP MAGNETI MARELLI IAW 10GF CAN MPC5642+95640 (BENCH+P003).
3. Click
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!
Related Posts

Kobelco ISUZU 4JJ1 P0047 Turbocharger EVRV Control Circuit High Solution
2023.04.2

BMW 35160 & 35080 EEPROM Odometer Correction By Yanhua 35xx Emulator
2019.02.24

Piwis 3 VS Piwis 4, what is the best interface?
2024.12.8

How to Upgrade UltraProg Programmer Firmware
2019.07.24

Possible to get Piwis 3 program work with Piwis interface tester 2?
2019.03.18

FCOM Key On Engine Off KOEO Test for Ford Ka 1999
2019.07.17

How to Use FCOM PATS Function for Key Programming
2019.06.10

Honda Accord 2018 Mileage Correction by iProg Pro
2023.04.4

BMW CAS3+ All Key Lost Programming by CGDI BMW
2019.03.21

Best Quality Wifi BMW ICOM Next A + B + C New Generation of ICOM A2
2018.12.17