This article show guide on how to programe smart key for Porsche Panamera.Hope it is helpful!
Step 1:Read out data of BCM.
Locate the BCM of Panamera,it is below steering wheel.BCM is divided into 3 type:315M,433M,434M frequency.You need to choose different frequency adapt releated BCM.And smart keys is divided into entry smart key and half-smart key.
Open theBCM,after you removing BCM.And locate chip that immobilizer data store in.It is at the lower right corner of BCM PCB board.The chip model where the immobilizer data store in is:1L15Y,2M25J,5M48H.
We can use VVDI Key Programmr,key msater or AP-pro to read out the eeprom data form chip,and save it at your computer.
Step 2:Generate Key
Open the key programmer software,and select porshe edit tool.Select releated chip model.Put new key into coil of AP-pro to read key ID,check key state.
Then select
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!