Question:
Can I can use PTT Dev version 2.7 to program a transponder key for an FMX Volvo with all key lost?
Answer:
Yes. Volvo PTT (Premium Tech Tool) Developer tool 2.7.25 is able to add key and program all keys lost on Volvo heavy duty models.
In case of add or delete keys:
The function is located in CALIBRATE section.
Go to Calibrate menu->3-Electrical system and instruments->36623-3 Add or remove keys.
To tun the operation in simulation mode select Run as simulated
Purpose:
Pair the ignition key with the CIOM so that the key can be used to start the vehicle
Note: In order to start the vehicle, each used key must be paired with the CIOM.
Procedure:
Calibration must be carried out when:
One or several new keys need to be added
-Only ne keys or keys that are already paired with this vehicle can be paired (keys paired with another vehicle will be rejected)
-Once the pairing operation started, all previously paired keys must be paired again as a first step
-Finnaly, the new keys to be added can be paired
Key(s) need(s) to be removed
-Removal of keys from CIOM is done by pairing again all previously paired keys except the keys that will be removed
One or several keys need to be replaced by new keys. Replacement of keys must be performed in 2 steps:
-Pair again all previously paired keys except the keys that will be replaced
-Finnaly, the new keys to be added can be repaired
CIOM has been replaced by a new one.
In case of all keys lost:
This post is from China OBD2, Chinaobd2 is a leading supplier of all kinds of Car Diagnostic Tool, Truck Diagnostic Tool, OBD2 Code Reader, Car Key Programmer,ECU Chip Tunning,etc.
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!