How to Program Toyota 8A-BA 2022- Proximity Keys with OBDSTAR X300 DP Plus?

Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation

OBDSTAR X300 DP Plus is able to program Toyota 8A-BA 2022- proximity models bypass PIN since Aug.10th, 2023 (click here to review). Uobdii.com will demonstrate how to use it to make a simulated key on 2022 GRANVIA HV with OBDSTAR TOYOTA-30 Cable and Key SIM.

Two steps to program Toyota 8A-BA 2022- proximity key:

Step 1: Read Immo Data

Step 2: Make Simulated Card (Key SIM)

Operation procedure:

Connect X300 DP Plus with internet, and make sure the internet connection is normal.

Use the TOYOTA- 30PIN connector to connect the vehicle proximity key and OBD interface

Tap “DP” on the main menu of X300 DP Plus tablet

Select CAR IMMO>> All>> TOYOTA LEXUS SCION >> TOYOTA LEXUS SCION V32.83>> Manual Select Model>> TOYOTA>> ASIA>> GRANVIA HV >> PROXIMITY>> 2022-

Step 1: Read Immo Data

Turn off the ignition switch, and cycle the double flash on-off once

Save the immo data after reading

Step 2: Make Simulated Card (Key SIM)

Read the instructions below carefully:

1.This function can make simulated key when all the keys are lost (note: simulated key needs to be kept charged, and it needs to be made again after the power is off);

2.The simulated key can replace the original car key to add keys, erase keys and other operations;

3.Has the current vehicle immo data been read? If the immo data is not read, please execute the immo data reading function first.

Then select the Toyota BA IMMO data just saved in step 1

Connect the OBDSTAR Key SIM Simulator to X300 DP Plus Key Programmer

Making simulator key…

Generate the simulated card successfully

Finally, move the simulated key close to the start button and try to light up the instrument. If the instrument can be lighted up normally, please use the simulated key instead of the original car key for the [Add Smart Key] operation.

Video guide:

Moreover, OBDSTAR X300 DP Plus Key Programmer (Key Master DP Plus) can program 2022- TOYOTA 4A Proximity keys as well. The Toyota 4A and 8A-BA car models are also compatible with OBDSTAR X300 PRO4 (Key Master 5).

This Post: How to Program Toyota 8A-BA 2022- Proximity Keys with OBDSTAR X300 DP Plus? From ChinaOBD2 Official Blog
Please keep this link if you copy the post!