Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation
OBDSTAR X300 Classic G3 Key Programmer added FIAT EUROPE PANDA HYBRID 2020-2024 BLADE, 500 HYBRID 2020-2024 BLADE, NEW DOBLO 2020-2024 BLADE, LANCIA YPSILON 2020-2024 BLADE, and BSI (PRE-CODING) DELPHI 70F3632/70F3633(ID46) TYPE 3 (2020- Hybrid) in the newest Fiat IMMO Software V42.97. All models support Program Keys, Make Dealer Key, Read IMMO Data, Show IMMO Info, and Unlock Keys. Here takes Panda Hybrid 2022 Blade as an example to show how to program all keys lost by OBDSTAR G3.
Procedure:
Select IMMO>> FIAT/ALFA ROMEO/…>> BSI (PRE-CODING)
Select the appropriate BSI (PRE-CODING) system
e.g. DELPHI 70F3632/70F3633 (ID46)
Select TYPE 3 (2020-Hybrid)
Insert a new key and turn on the ignition
Ensure the internet connection is established
Then start to read IMMO data, make dear key and program key one by one.
1.Read IMMO data
Input a file name to save the IMMO data
Take a screenshot to save the read Pincode
2.Make Dealer Key
Select the IMMO data file just saved
Put the new key (or key chip) in the key sensing coil
3.Program Key
Input the Pincode just read
Turn on or turn off the ignition according to the device prompts
Wait a while, and the key programming is successful by X300 Classic G3
Finally, turn on the ignition to start the car normally
Video guide:
www.chinaobd2.com
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!