Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation
This article show a tutorial on how to reprogram a PROTON GEN 2 key.Got this form rang main dealer,hope it can help you.
Procedures:
1Switch the ignition on and press and hold alarm reset switch usually on the centre console next to the fog light switch.
2Switch the ignition off and remove the key from the ignition barrel
3Turn the ignition on with working key
4Release the alarm switch and operate it once-this should make the alarm LED to flash twice.
5Still with the ignition on,operate the lock button on the first remote,the alarm should sound once to confirm.
6Keep the ignition on and at the same time operate the lock button on the first remote,this hould make the alarm to sound once to confirm
7Operate the lock button on the second remote fob – the alarm will beep once ot confirm
8Switch ignition off
And here are more auto key programming in
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!