Skip to content
Menu
OBD2 Scanner Blog
  • Home
  • Car Diagnostic Tool
    • MB Star Diagnosis
    • BMW Diagnostic Tool
    • GM Tech2
    • Volvo Vocom Interface
  • OBD2 Code Scanner
    • VXDIAG
  • Tech Support
OBD2 Scanner Blog

How to Program 2013 Audi S4 All Keys Lost with Launch X431 Pro5?

Posted on December 24, 2024 by VCDS

Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation

Use Launch X431 Pro5 to do 2013 Audi S4 all keys lost key programming, works perfectly! Launch X-Prog 3 Immobilizer & Key Programmer is required. Only need three steps.

Step 1: Read Anti-Theft Data

Step 2: Generate Dealer Key

Step 3: Learn Key

In details…

1.Connection:

Connect SmartBox 3.0 and vehicle’s DLC via the OBDII extension cable

Connect X-431 Pro5 diagnostic tool and SmartBox 3.0 via Bluetooth

2.Identify vehicle info

Turn on X431 Pro5 tablet

Tap Intelligent Diagnose

How to Program 2013 Audi S4 All Keys Lost with Launch X431 Pro5?

It will connect VCI…read VIN…decode VIN.

Automatically detect the vehicle info successfully. It’s 2013 AUDI S4.

Click “Diagnostic”

How to Program 2013 Audi S4 All Keys Lost with Launch X431 Pro5?

3.Program all keys lost

Select Special Function>> Anti-theft Function>> Generation 4 And Above Immobilizer System>> All Keys Are Lost

How to Program 2013 Audi S4 All Keys Lost with Launch X431 Pro5? How to Program 2013 Audi S4 All Keys Lost with Launch X431 Pro5? How to Program 2013 Audi S4 All Keys Lost with Launch X431 Pro5? How to Program 2013 Audi S4 All Keys Lost with Launch X431 Pro5?

Simultaneously connect Launch GIII X-Prog3, smartbox and X431 PRO5 according to the connection diagram

It will upgrade the anti-theft key matching connector.

Update adaptor firmware successfully

How to Program 2013 Audi S4 All Keys Lost with Launch X431 Pro5?

Select 5th Immobilizer>> A4/A5/Q5

How to Program 2013 Audi S4 All Keys Lost with Launch X431 Pro5? How to Program 2013 Audi S4 All Keys Lost with Launch X431 Pro5?

Then perform the key programming process

How to Program 2013 Audi S4 All Keys Lost with Launch X431 Pro5?

Step 1: Read Anti-Theft Data

Insert the key to the keyhole or place it to the key sensing area, and turn on the ignition switch to illuminate the instrument if all keys are lost, turn on the hazard warning flasher and press the brake

How to Program 2013 Audi S4 All Keys Lost with Launch X431 Pro5?

Disconnect the BCM2 for more than 5 seconds and connect again

How to Program 2013 Audi S4 All Keys Lost with Launch X431 Pro5?

Reading the anti-theft data…

Read and backup the anti-theft data successfully

How to Program 2013 Audi S4 All Keys Lost with Launch X431 Pro5?

Take a screenshot to save the vehicle info

How to Program 2013 Audi S4 All Keys Lost with Launch X431 Pro5?

Step 2: Generate Dealer Key

Place a blank key into the Launch GIII X-Prog 3

How to Program 2013 Audi S4 All Keys Lost with Launch X431 Pro5?

If failed to generate the key, put the key correctly again

Generate dealer key successfully

How to Program 2013 Audi S4 All Keys Lost with Launch X431 Pro5?

Step 3: Learn Key

Input the number of keys to be learned

Insert the key to be learned successively within 30 seconds and turn to “ON” position

Interval for changing keys is less than 5 seconds

For smart key, place the key to be learned near the key sensing area, and press “START” button

How to Program 2013 Audi S4 All Keys Lost with Launch X431 Pro5?

Finally, remove the Launch SmartBox 3.0 from the vehicle

Done!

www.chinaobd2.com

How useful was this post?

Click on a star to rate it!

Average rating / 5. Vote count:

This Post: How to Program 2013 Audi S4 All Keys Lost with Launch X431 Pro5? From ChinaOBD2 Official Blog
Please keep this link if you copy the post!

Post navigation

Prev: Prev: OBDSTAR P50 Reset TOYOTA 89170-08110 R7F7016443 Airbag on Bench
Next: Next: CG70 Airbag Reset Tool V1.0.5.0 Update

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Recent Posts

  • How to Copy Sensor ID by Xhorse XTPMS Sensor and Key Tool Max Pro?
  • Yanhua ACDP2 Program BMW G Chassis BDC2 All Keys Lost on Bench
  • Scania Truck ALM 000800 Interrupted LIN Communicatin Siren
  • BMW G Series BDC2 Module Virgin and Replacement by APPRO2
  • CG FC200 V1.2.9.2 Update: BMW Coolant Temperature Setting Added

Recommend OBD2 Scanner

ME9.7 ECU Engine Computer ME9.7 ECU Engine ComputerTabScan T6PT3G Diagnosis VCI for Porsche Diagnostic Tool Porsche Diagnostic Tool

Recent Comments

  • amr on MAN EOL Flash File Editor + MAN Immo Calculator Free Download
  • Pasquale Greenwald on Jungheinrich ETM/V 10-12 Tightening Torque for Screwed Connection on Brake Systems
  • VCDS on Scania SDP3 2.53.1 Diagnosis & Programming Free Download
  • Crossley on What are the functions of Iprog+ Programmer?
  • Lukas on VAG EDC15 EDC16 IMMO OFF Software Free Download

Archives

Categories

  • BMW Diagnostic Tool
  • Car Diagnostic Tool
  • Key Cutting Machine
  • Key Programming Tool
  • MB Star Diagnosis
  • OBD2 Code Scanner
  • Tech Support
  • VXDIAG

Tags

adapter Auto Pick and Decoder Car Key Copy Car Key Programmer cat Code Reader diagnostic software ECU Chip Tunning ecu programmer Ford gm handy baby Handy Baby 2 Key Programmer Handy Baby II Key Programmer HEX V2 immo iprog key Key Pro key programmer laptop Launch lish LISHI new arrivals nexiq nexiq link diesel truck interface nexiq truck diagnostic NEXIQ USB Link OBD2 obdii original program Scania VCI smart VAG COM Cable VCDS VCDS Cable VCDS VAG COM Cable vci VW wholesale X-PROG Box X-PROG Box ECU Programmer XPROG-M

Hot Selling

  • ME 9.7 ECU Engine Computer
  • MINI VCI J2534
  • NCF29XX Programmer
  • ThinkTool Pros+

Links

  • China OBD2
  • EPS Foam Machine
  • Foxdiag
  • Сканер OBD2
©2025 OBD2 Scanner Blog | Powered by chinaobd2