How to perfrom a Dataset Registration on a CNH machine

Posted on by VCDS

Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation

How to perfrom a Dataset Registration on a CNH machine

Sometimes it is necessary that a Dataset Registration is done on the machine after a modified file has been flashed on the ECU.

There are to ways how that can be done.

Option 1 without CNH EST.

After the modified file has been flashed on the machine do not start the engine.
Disconnect the flash tool.
Switch the ignition to the on position. (Do not start the engine)
Leave the ignition in the on postition for at least 20 minutes.
After at least 20 minutes with the ignition switch in the on position you can turn it off.
Start the engine.
If all steps are done correctly the dataset should be registered.

If this option does not reigster the dataset correctly it needs to get done with the CNH EST diagnostic software.

Option 2 with CNH EST.
Connect the machine correctly with the CNH EST Diagnostic Tool.
Click on the Configuration button and there choose Engine Dataset Registration.

How to perfrom a Dataset Registration on a CNH machine

In the Dataset registration window click on

How useful was this post?

Click on a star to rate it!

Average rating / 5. Vote count:

This Post: How to perfrom a Dataset Registration on a CNH machine From ChinaOBD2 Official Blog
Please keep this link if you copy the post!

Tags:

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *