Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation
This instruction show you guide on how to install crankshaft for Volvo D1-30 marine diesel engine
Related Contents:
2018 Volvo Penta VODIA5 5.2.50 Diagnostic Software Free Download
Volvo Penta EPC 6 2022 2016 Offline Free Download
Procedures:
1.Check the cleanliness of the crankshaft drillings and bearing surfaces, engine block and bearing caps. Check that the bearing shells and their beds do not have any burrs or upsets.
2.Put the main bearings in their places in the bearing caps. Bearing shells with an oil hole must be placed in the upper bearing cap. Check that the lubrication holes in the upper bearing shells are centered on the oil ducts.
3.Oil the bearings and the main bearing journals and install the bearingcaps in their places. The cham fered edges must face forwards on all bearing caps. Please refer to the illustration, to identify the location of the bearing caps.
4.Torque the bearing caps, please refer to the
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!