It is necessary to remove cylinder when you do replacement or service operation.Here is the instruction show you guide on how to disassemble cylinder for Kubota U48-4 and U55-4 excavator.
Related Contents:
Takeuchi Excavator Workshop EPC+Service Manual 2018 PDF Files
2022 Kubota Takeuchi Diagmaster v20.11.01 v4.1.2 Software Free Download
Kubota EPC Spare Parts Catalogue 2021.06 Download
Disassembly Procedures
Cylinder Disassembly
1.Drain the oil from inside the cylinder, and fasten the cylinder bottom in a vice across the bolt width.
2.Place an anti-rotation device in one position of the cylinder head (3).
(3) Cylinder head
3.Use a wrench (hook) or wrench (key) to loosen the cylinder head (3).
While loosening the cylinder head (3) screw, remove the cylinder head.
(3) Cylinder head
4.Pull out the piston rod assembly (2) together with the cylinder head (3), and place on a board.
IMPORTANT
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!