How to Diagnose and Reset DTC on BMW by Alientech KESS3?

Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation

Alientech Kess 3 ECU Programmer added new DTC features on June 27th, 2024. It allows you to view and reset DTCs in a car or motorcycle. Through the EOBD connection of KESS3, Alientech Suite retrieves the list of (SAE – Society Automotive Engineers) error codes recorded during vehicle operation, helping you easily identify potential faults and damages. Here takes BMW 5 series F10 2010 523I 8AT as an example to show how to diagnose and reset DTC by Kess3.

Tips and guides:

1.Make sure your Kess V3 is under software subscription.

2.Connect Kess V3 ECU programmer and BMW car via OBD

3.Run Alientechsuite software, select the corresponding BMW model

4.Click [EXTRA] and select DTC option

5.Confirm to see the manual or not, click the corresponding icon according to your need

6.Go to next step, you can see the screen appears [View/delete DTCs], click [Continue]

7.Follow the prompt to turn the ignition on, and check the connections and press [OK] to continue

8.Wait a moment, and it will diagnose the DTC quickly

9.Click [Save DTC list] to save the DTC

10.After saving, you can open the DTC file on the desktop. It shows the number of DTCs found.

11.Back the operation page on Kess3 software, click [Erase]

12.Follow the prompt to turn the ignition off, then wait a while, the DTC will be cleared successfully.

www.chinaobd2.com

This Post: How to Diagnose and Reset DTC on BMW by Alientech KESS3? From ChinaOBD2 Official Blog
Please keep this link if you copy the post!