In this guide, ukobd2.com show you guide on how to use BMW ENET cable to delete FSC for BMW CIC unit.
Preparations:
BMW E-sys 3.33.0/3.32.1/3.30.01 Coding Software Free Download
ENET OBD Interface Cable for BMW E-SYS (Amazon)
Procedures:
Connect ENET cable to vehicle OBD port,if you use ICOM you need configure routing.
Run CMD as administrator on your PC
Then input “ping 169.254.199.199” (CIC unit IP address)
If connection build successfully,it will show ou as below
If connection build failed,please restart CIC unit or disconnect battery negative.
Run far software,press “Alt+F2”,then select “Netbox”
Click below picture red arrow,then press “Shift+F4”
Select “FTP”,input CIC IP address “169.254.199.199”
Login type:Normal
User name:files
Password:remote
Then click “connect”
Access “mnt”–>”hbdebug\data01\02\03”,then delete files
Access “mnt”–>”HBpersistence\norm\swt”,then delete file
FSC file is stored in “data” and “swt” folder
Delete procedures:
Press “F4” to edit file
Ctrl+A select all
Press “Delete” bottom on keyboard
After then press “F4” to exit and save.
Now restart CIC unit,FSC will been deleted
And for generate FSC code for CIC,please refer to:How to Easily Generate FSC Codes for BMW CIC Units by Yourself
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!