How to Connecting the DETROIT Engines using Detroit Diesel Diagnostic Link (DDDL)

Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation

#To connect the DDDL:
1). Open Diagnostic Link through shortcut on desktop or click Start – All Programs – Detroit Diesel – Diagnostic Link, it will automatically connect to the ECM, and will displays Error Number 275, then click OK.

2). After click OK, will displays The Welcome Screen, then click Close.

3). Choose Options from the Tools menu to display the Options dialog box.

4). Interface Options – Click the Interface tab to specify the interface you use to connect. Select the combination of interface and COM port that you are using from the Local Communications Interface drop-down list box.

5). After selected, will displays Options message as below. Click OK then it need to restart the Diagnostic Link.

6). Once connected to the ECM, it will displays Engine Configuration Data as below. Click Close or Print.

This Post: How to Connecting the DETROIT Engines using Detroit Diesel Diagnostic Link (DDDL) From ChinaOBD2 Official Blog
Please keep this link if you copy the post!