Foxflash updated Delco Bosh Siemens Phoenix Tuning and New Clone Function on November 15th, 2023. It can clone Delco E38 E92 E83 E80 E39A via OBD, etc. (click here to review). Let’s see how to clone Delco E83 successfully.
DELCO E83 – OPEL/Chevrolet Pinout to foxflash ECU Programmer:
Read and write ECU with the following driver:
BDM/JTAG MODE>> JTAG NEXUS MPC/SPC>> MPC 55xx
INFORMATION FOR CONTROL UNIT CLONING:
To clone the control unit, please perform the following steps:
– Read ECU 1 in JTAG;
– Write the file on ECU 2 in JTAG;
– Mount the ECU 2 on the car;
– Rewrite the file via OBD plug using the driver CAR > OPEL > [model] > DELCO E83
Customer feedback:
Read full and write in the donor ecu, just cloned a faulty ECU. Write the original file. Not modified anything.
Just plug and play, don’t need opcom.
No extra resistors needed or opening of ecu. You have to follow the instructions in Foxflash tool. We don’t add stuff like resistors or other things if there are not mentioned in the instruction.
Select full system not bench and connect the bench cable without the box.
Full system doesn’t work with bench box.
www.chinaobd2.com
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!