Many ECU programmers at uobdii.com are able to clone Bosch ME17.8.8 on bench, such as Foxflash, CG FC200, OBDSTAR DC706 (check here). Launch X431 ECU&TCU Programmer also can support this feature. Let’s see how it works.
1.Connect X431 ECU Programmer and computer via USB cable
2.Run X-431 ECU & TCU Programmer PC software, input me17.8.8 in the search box to quickly find the ECU, it’s Baic Senova 2014-2017 A151E-1 1500 150 ME17.8.8 HW2_TC1728
3.Enter the main operation page
Check the wiring diagram by clicking “Direct connection of diagram”
Connect X431 ECU Programmer and ECU correctly according to the diagram
Supply power to the device as well
4.Read chip ID
5.Read EEPROM data and save the data
6.Read FLASH data and save the data
7.Disconnect
8.Connect to a new Bosch ME17.8.8 ECU and repeat the same steps to read chip ID, EEPROM & FLASH data
9.Upload the corresponding original files to write into the new Bosch ECU
All read and write operations are completed. Launch X431 ECU Programmer clone ME17.8.8 successfully
www.chinaobd2.com
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!