Skip to content
Menu
OBD2 Scanner Blog
  • Home
  • Car Diagnostic Tool
    • MB Star Diagnosis
    • BMW Diagnostic Tool
    • GM Tech2
    • Volvo Vocom Interface
  • OBD2 Code Scanner
    • VXDIAG
  • Tech Support
OBD2 Scanner Blog

How to choose Launch X431 IMMO Key Programmer

Posted on December 24, 2024 by VCDS

Launch X431 IMMO Plus and X431 IMMO Elite are all-in-one Auto key programmer, released by Launch Tech. They all support comprehensive immo function, diagnostics and service functions. But what’s the different between and How to choose? Here is the comparsion:

How to choose Launch X431 IMMO Key Programmer

Same Hardware:

Launch X431 IMMO Plus and Launch X431 IMMO Elite have same hardware, they are equiped with 8inch, 1280*800 Display Screen, Androd 10.0, 4 + 64G storage,6300mAh battery.

Same Functions:

IMMO Anti-theft Functions: IMMO PLUS LAUNCH scanner can read the immobilizer PIN and backup the key information for later reset/relearn. Include Read PIN; Key De-lete/Add/All Lost; Key Learning; Module Data Wiping; Module Replacement, IMMO ECU Reset, etc.
Key Programming: Working with X431 PROG3 key programmer, LAUNCH X431 IMMO PLUS serves 99% of coverage and provides Engine/Gearbox ECU Module Cloning & Replacement; Remote Matching; Key Generation; Key Learning; Read/Write Key EEPROM, MCU, Engine, Immobilizer; Backup & Restore Engine ECU Programming Data, etc.
ECU Module Clone: Cover Engine/Gearbox ECU Clone for 5000+ models. Easily replace the new/used modules without complex & tedious operations.
39+ Maintenance Functions: IMMO PLUS scanner not only configure comprehensive IMMO functions but also integrates common reset functions for a full range of diagnostics.
All-system Diagnostics: IMMO PLUS scans all the vehicle control modules and finds out all the DTCs to help you to know what’s wrong with the car.
Bi-directional Control: An essential feature for quickly locating vehicle problems and saving your time.
With X-PROG 3 Key Programming Tool : Compatible with X-PROG 3 enables reading and writing EEPROM, generating special keys, anti-theft type identification, remote control matching, key chip reading and matching, anti-theft password reading and anti-theft component replacement.
2 Years Free Update: Provides 2 Years free update, One-Touch update via WiFi to enjoy more functions, get wider available vehicle coverage, add more languages, and improve the performance.
99% of Vehicle Coverage and 24+ Language Supported.

Different: Launch X431 IMMO Plus support more functions, the function below is Launch x431 immo plus support but Launch X431 IMMO elite not or need to subscribe.

CAN FD Protocol: With the assistance of new communication standards, LAUNCH IMMO PLUS auto scanner enables much higher data rates & faster diagnostic speed than ever.A
AutoAuth for FCA SGW: Use the latest software update function AutoAuth to provide diagnosis, active testing, etc., making the diagnostics more secure.Applicable to FCA vehicles equipped with a security gateway module (SGW) in 2017 and later.
ECU Coding: Solving some ECU-related issues and allowing you to personalize your vehicle functions as preference need.
VAG Guided Functions: Offer step-by-step instructions and guide technicians to do fast repairs.

Learn more: Launch IMMO Elite vs IMMO Plus vs X431 Pad VII vs X431 V+

Launch X431 IMMO Plus: https://www.chinaobd2.com/vp-launch-x431-immo-plus.html
Launch X431 IMMO Elite: https://www.chinaobd2.com/vp-launch-x431-immo-elite.html

How useful was this post?

Click on a star to rate it!

Average rating / 5. Vote count:

This Post: How to choose Launch X431 IMMO Key Programmer From ChinaOBD2 Official Blog
Please keep this link if you copy the post!

Post navigation

Prev: Prev: How to Use Super MB Pro M6+ for Benz and BMW Diagnosis?
Next: Next: FoxFlash ECU Programmer Incorrect Software Number Solution

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Recent Posts

  • Caterpillar C9 Engine Coolant Level Signal Invalid Fault Code 12 111-2
  • chinaobd2.com Spring Festival Sale: Global Save Up to 50%
  • Allison 3000 & 4000 Gen5 Fault Code P070C Transmission Fluid Level Sensor Circuit Low
  • Allison 3000 & 4000 Gen5 Fault Code P070C Transmission Fluid Level Sensor Circuit Low
  • Doosan Machine Fault Code P060B ADC Test Error Solution

Recommend OBD2 Scanner

ME9.7 ECU Engine Computer ME9.7 ECU Engine Computer TabScan T6PT3G Diagnosis VCI for Porsche Diagnostic Tool Porsche Diagnostic Tool

Recent Comments

  • amr on MAN EOL Flash File Editor + MAN Immo Calculator Free Download
  • Pasquale Greenwald on Jungheinrich ETM/V 10-12 Tightening Torque for Screwed Connection on Brake Systems
  • VCDS on Scania SDP3 2.53.1 Diagnosis & Programming Free Download
  • Crossley on What are the functions of Iprog+ Programmer?
  • Lukas on VAG EDC15 EDC16 IMMO OFF Software Free Download

Archives

Categories

  • BMW Diagnostic Tool
  • Car Diagnostic Tool
  • Key Cutting Machine
  • Key Programming Tool
  • MB Star Diagnosis
  • OBD2 Code Scanner
  • Tech Support
  • VXDIAG

Tags

adapter Auto Pick and Decoder Car Key Copy Car Key Programmer cat Code Reader diagnostic software ECU Chip Tunning ecu programmer Ford gm handy baby Handy Baby 2 Key Programmer Handy Baby II Key Programmer HEX V2 immo iprog key Key Pro key programmer laptop Launch lish LISHI new arrivals nexiq nexiq link diesel truck interface nexiq truck diagnostic NEXIQ USB Link OBD2 obdii original program Scania VCI smart VAG COM Cable VCDS VCDS Cable VCDS VAG COM Cable vci VW wholesale X-PROG Box X-PROG Box ECU Programmer XPROG-M

Hot Selling

  • ME 9.7 ECU Engine Computer
  • MINI VCI J2534
  • NCF29XX Programmer
  • ThinkTool Pros+

Links

  • China OBD2
  • EPS Foam Machine
  • pcb assembly
©2025 OBD2 Scanner Blog | Powered by Superb Themes