Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation
Xhorse Masker Garage Remote Frequency change by Key Tool Max Pro Tutorials.
Step 1: Disassemble Masker Garage Remote key
Remove the cover of the remote key
Tear off the Xhorse logo on the back
Unscrew the screw with a screwdriver
Remove the back cover and take out the PCB of the remote key
The disassembly of the remote key is completed.
Step 2: Change the frequency of Garage Remote Key
Connect Xhorse Key Tool Max Pro and remote key via the wired remote key cable which is provided by Key Tool Max Pro
Turn on Key Tool Max Pro and enter Special Function interface
Select VVDI remote function>> Garage door key customization
Click Read to read the remote control frequency
Read successfully! The frequency is 315MHz and the frequency offset is 055Khz.
Click on Frequency MHz (260~960) value to be modified
Click on Frequency offset KHz (0~200) value to be modified
Note: needs to enter the value within the range it shows
Click Settings to complete the modification
Setup successfully
Click Read again, now the Xhorse Garage Remote Key frequency becomes 433MHz and frequency offset becomes 026Khz.
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!