Here is a maintenance guide on how to change differential & final drive oil for Caterpillar 950F excavator.If you want to know more about Caterpillar case,please refer to Caterpillar Trouble Repair.
Related Contents:
Caterpillar SIS 2021 2019 2018 Full EPC+Service Manual Free Download
Caterpillar ET 2022A 2019C 2018A Electronic Technician Software Free Download
Caterpillar ET4 Diagnostic Adapter
Notice:
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing,adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component
containing fluids.
Dispose of all fluids according to local regulations and mandates.
Note: The axle housings are equipped with magnetic drain plugs.
1.Remove drain plugs (2). Allow the oil to drain into a suitable container.
2.Clean the drain plugs and install the drain plugs.
3.Wipe off dipstick/fill plugs (1) and the surfaces around dipstick/fill plugs (1).
4.Remove the dipstick/fill plugs. Fill the axles with oil.
5.Clean the dipstick/fill plugs and install the dipstick/fill plugs.
6.Run the machine on level ground for a few minutes in order to equalize the oil level in the axle. Check the oil level in the axle.
Differential and Final Drive Oil Level
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!