Xhorse VVDI BIMTool Pro can change CAS1,CAS2,CAS3,CAS3+,CAS4(0L15Y),CAS4(5M48H) KM(mileague) via dump file.
How to change BMW CAS1-CAS4 KM with VVDI BIMTool Pro?
Change KM for EWS/CAS:Load EEPROM dump?input new KM value?press button Change KM and save new EEPROM dump then write it to EEPROM.
CAS1/CAS2/CAS3/CAS3+ change KM steps:
1) Record the KM information displayed in instrument, take instrument away from car avoid synchronize KM with CAS automatically
2) Set CAS KM to 0 (you can do this via OBD or EEPROM dump, select correct CAS version)
3) Read instrument EEPROM dump by programmer then save EEPROM dump you read, usually it use M35080 chip
4) Select File Change KM ->M35080 (Instrument) and load EEPROM dump saved in step 3 Attention: this type instrument have 2 algorithm for KM, Algorithm 1 and Algorithm 2, you need try different algorithm to check the Old KM in file value, which one is nearby the KM (write in step 1)), which is the right type. Change new KM with the right type
5) Input new KM
6) Press button
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!