How to Build Connection Between Dr.ZX and Hitachi Excavator

Posted on by
How-to-Build-Connection-Between-Dr.ZX-and-Hitachi-Excavator-8

This instruction show you guide on how to connect Dr.ZX diagnostic tool to computer and Hitachi excavator.

 

Preparations:

Hitachi MPDr v2.56 v2.25 Diagnostic Software Free Download

 

Procedures:

Cable Connection

1.Connect a personal computer installing MPDr. to the connector in the cab (refer to the below illustration) with a USB serial cable, an interlink cross cable, and a connecting harness.
2.Turn the key switch ON or start the engine.
How-to-Build-Connection-Between-Dr.ZX-and-Hitachi-Excavator-1

 

Connecting Harness
Part No.: 3108613 (ZX-5/ZW-5/ZX-3/ZW)
Interlink Cross Cable
Part No.: 4668565
Please locally procure an USB serial cable.

ZX-3 Series (Except US, USR)
Wheel Excavator

How-to-Build-Connection-Between-Dr.ZX-and-Hitachi-Excavator-2

ZX-3 US and USR Series

How-to-Build-Connection-Between-Dr.ZX-and-Hitachi-Excavator-3

ZX-5 Series
Crawler Excavator

How-to-Build-Connection-Between-Dr.ZX-and-Hitachi-Excavator-4

ZX-6 Series

How-to-Build-Connection-Between-Dr.ZX-and-Hitachi-Excavator-5

 

Checking the Communication Port

How useful was this post?

Click on a star to rate it!

Average rating / 5. Vote count:

This Post: How to Build Connection Between Dr.ZX and Hitachi Excavator From ChinaOBD2 Official Blog
Please keep this link if you copy the post!

Leave a Reply

Your email address will not be published. Required fields are marked *