Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation
Here is the instruction show you guide on how to adjust clutch pedal for Kubota L3901 tractor.
Related Contents:
2022 Kubota Takeuchi Diagmaster v22.08.01 v4.1.2 Software Free Download
Kubota EPC Spare Parts Catalogue 2021.06 Download
Kubota DST-I Diagnostic Tool
Adjusting Clutch Pedal (Single Clutch)
1 Stop the engine and remove the key.
2 Slightly depress the clutch pedal and measure free travel at the top of pedal stroke.
3 If measurement is needed, loosen the lock nut (1) and turn the clutch rod (2) or turnbuckle (3) to adjust the rod length within acceptable limits.
4 Retighten the lock nut
Adjusting Clutch Pedal (Dual Stage Clutch)
1 At first adjust clutch play, same as with single disc clutch.
2 Remove the cover located on the right side of flywheel housing case.
3 Loosen the lock nut (1), tighten the adjust bolt (2) by using 7 mm spanner until head of the bolt contacts pressure plate slightly.
Make 3/4 turn counterclockwise to give 0.9 to 1.0 mm (0.035 to 0.039 in.) clearance.
4 Tighten the lock nut (1), holding the adjust bolt (2).
5 Turn the flywheel to adjust the clearance of other adjusting bolts (3 bolts).
6 Repeat step 3. and readjust free travel of clutch pedal if necessary.
More repair case for Kubota,please refer to:Kubota Trouble Repair
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!