Test report: successfully added a 3-button key card to a Renault Megane III year 2009 using FVDI2 full abrites commander.
Original key card:
New key to be programmed
Step 1: Read Pin Code
Open FVDI software, Select Renault Software->V5.2
Choose Key Learning function-> model Megane III X95 2009+
Press Start in menu to read key information
Then Read PIN Code
This is a Megane III, put the key card in ignition lock without starting engine
Read Pin Code success
Step 2: Learn key with FVDI Renault
Press Learn function
Enter number of keys to be programmed: 2
Press OK to continue
Insert key 1 into ignition lock and switch ignition to ON position
Then insert key 1 and turn ignition to ON position
Key learning in process
Press OK to save key learning result.
Turn ignition OFF and then ON
Key learning success
Test both keys. Both keys can start car.
This post is from China OBD2, Chinaobd2 is a leading supplier of all kinds of Car Diagnostic Tool, Truck Diagnostic Tool, OBD2 Code Reader, Car Key Programmer,ECU Chip Tunning,etc.
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!
View Comments (2)
I recently purchased SBB Pro2 Key Programmer. I am having trouble with programming a key as its asking for PIN CODE and the PIN No. given in my car's maintenance booklet is not accepted by the unit. I went to Renault dealer but they will not provide me with my PIN Code. Can you help.
My car is 2008 Renault Megane(Reg No. BF58BHK)
I recently purchased SBB Pro2 Key Programmer. I am having trouble with programming a key as its asking for PIN CODE and the PIN No. given in my car’s maintenance booklet is not accepted by the unit. I went to Renault dealer but they will not provide me with my PIN Code. Can you help.
My car is 2008 Renault Megane MKll (58)