Skip to content
Menu
OBD2 Scanner Blog
  • Home
  • Car Diagnostic Tool
    • MB Star Diagnosis
    • BMW Diagnostic Tool
    • GM Tech2
    • Volvo Vocom Interface
  • OBD2 Code Scanner
    • VXDIAG
  • Tech Support
OBD2 Scanner Blog

How to add a Benz W207 Key by Autel MaxiIM IM608 Pro

Posted on December 24, 2024 by VCDS

Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation

How to make a Benz W207 new key by Autel MaxiIM IM608 all-in-one auto key programmer, here is the tutorials with detail steps.

Device Preparation:

Autel MaxiIM IM608 Pro, VVDI Be Key Pro Yellow Version.

How to add a Benz W207 Key by Autel MaxiIM IM608 ProHow to add a Benz W207 Key by Autel MaxiIM IM608 Pro

Steps:

Install VVDI BE Key Pro Yellow PCB with the 3 button key shell

How to add a Benz W207 Key by Autel MaxiIM IM608 Pro

How to add a Benz W207 Key by Autel MaxiIM IM608 Pro

Connect Autel IM608 Pro to the vehicle properly

How to add a Benz W207 Key by Autel MaxiIM IM608 Pro

Insert the Xhorse VVDI BE Key Pro into EIS to test, doesn’t work

Go to IM608 tablet

Tap IMMO>> Accept the disclaim>> Mercedes- Benz>> Automatic selection

Read VIN automatically

Confirm the vehicle info

How to add a Benz W207 Key by Autel MaxiIM IM608 Pro

Tap 2008-2014>> Hot function>> Add key (guided)>> On bench>> Auto scan

Detect the current EIS type is W207

How to add a Benz W207 Key by Autel MaxiIM IM608 Pro

Follow the on-screen instruction to perform key adding:

Read EIS data
Read ignition key information

Insert the ignition key into the IR keyhole on the Autel IM608 Pro programmer

How to add a Benz W207 Key by Autel MaxiIM IM608 Pro

This ignition key is a smart key, press Yes to continue

Confirm the IMMO status (the existing keys number is 4 and key is smart key)

Read blank key information

Put the VVDI BE Key Pro close to the IM608 programmer remote reception position and press any button of the key

Insert this blank key into the IR keyhole on the programmer

How to add a Benz W207 Key by Autel MaxiIM IM608 Pro

Obtain key password

There is not a key password, press OK to enter password calculation process

Insert the ignition key into the EIS and wait for 5s

Pull the ignition key out

Insert the ignition key into the EIS and wait for 2s

After pulling the ignition key out, insert it into the IR keyhole on the programmer

Collecting data and calculating password

Calculate password successfully

How to add a Benz W207 Key by Autel MaxiIM IM608 Pro

Insert the ignition key into the EIS and wait for 30s

Password calculation is completed

Generate key file

Insert the blank key into the IM608 Pro programmer IR keyhole

Detecting key

Write BE Key file

Key addition is completed

How to add a Benz W207 Key by Autel MaxiIM IM608 Pro

Test if new key works normally

The test result is the Xhorse VVDI BE Key Pro yellow PCB added Benz key successfully with Autel IM608 Pro key programmer.

How to add a Benz W207 Key by Autel MaxiIM IM608 Pro

Video Guide:

How useful was this post?

Click on a star to rate it!

Average rating / 5. Vote count:

This Post: How to add a Benz W207 Key by Autel MaxiIM IM608 Pro From ChinaOBD2 Official Blog
Please keep this link if you copy the post!

Post navigation

Prev: Prev: How to Solve Fetrotech Tool Installation Problem with Window
Next: Next: Autel MaxiDAS DS808 Vs Autel MaxiPro MP808 Series

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Recent Posts

  • Doosan Stage V Engine U02A2 Timeout Error of CAN-Receive-Frame A1DEFI Solution
  • What is “Unlock DME” for Yanhua ACDP BMW BDC2 All Keys Lost?
  • How to Solve Doosan Stage V Engine P011E Coolant Temperature Plausibility Fault
  • Xhorse VVDI2 V7.5.0 Update: Suport add key function for BMW G-Series BDC2 type
  • Yanhua ACDP2 Fixed BMW BDC2 System Abnormal and Coding Lost Issues

Recommend OBD2 Scanner

ME9.7 ECU Engine Computer ME9.7 ECU Engine ComputerTabScan T6PT3G Diagnosis VCI for Porsche Diagnostic Tool Porsche Diagnostic Tool

Recent Comments

  • amr on MAN EOL Flash File Editor + MAN Immo Calculator Free Download
  • Pasquale Greenwald on Jungheinrich ETM/V 10-12 Tightening Torque for Screwed Connection on Brake Systems
  • VCDS on Scania SDP3 2.53.1 Diagnosis & Programming Free Download
  • Crossley on What are the functions of Iprog+ Programmer?
  • Lukas on VAG EDC15 EDC16 IMMO OFF Software Free Download

Archives

Categories

  • BMW Diagnostic Tool
  • Car Diagnostic Tool
  • Key Cutting Machine
  • Key Programming Tool
  • MB Star Diagnosis
  • OBD2 Code Scanner
  • Tech Support
  • VXDIAG

Tags

adapter Auto Pick and Decoder Car Key Copy Car Key Programmer cat Code Reader diagnostic software ECU Chip Tunning ecu programmer Ford gm handy baby Handy Baby 2 Key Programmer Handy Baby II Key Programmer HEX V2 immo iprog key Key Pro key programmer laptop Launch lish LISHI new arrivals nexiq nexiq link diesel truck interface nexiq truck diagnostic NEXIQ USB Link OBD2 obdii original program Scania VCI smart VAG COM Cable VCDS VCDS Cable VCDS VAG COM Cable vci VW wholesale X-PROG Box X-PROG Box ECU Programmer XPROG-M

Hot Selling

  • ME 9.7 ECU Engine Computer
  • MINI VCI J2534
  • NCF29XX Programmer
  • ThinkTool Pros+

Links

  • China OBD2
  • EPS Foam Machine
  • Foxdiag
  • Сканер OBD2
©2025 OBD2 Scanner Blog | Powered by chinaobd2