Honda CRV 2010 Remote Trouble Repair

Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation

One of my friends Tom shared his repair case about Honda CRV 2010 remote trouble to me.I rewrite it here to share this real repair to my readers,hope it will bring some enlightenment to your work.

 

Experience of Honda CRV 2010 remote trouble repair:

Before start repairing the remote problem,I check the frequency and battery of the remote,both of them work normally.

Try to program a new remote and the old remote for the Honda CRV,both of them can not be reprogramed.Then disconnected the vehicle battery to clear the trboule,but it occurred the warning.And I found can not listen any sound like beep when using the remote to open the doors,and the dashboard also can not display door open state.

Remove the steering cover to check the ignition coil contactors and the resistance value,both of them are normal.Then check the switch of closed door,it also work correctly.

Then use X431 to read the trouble code:B1000,B1008,B1011.All of them are have no relation to remote.Remove the MICU,check the MICU and its revelvant wire connector,normally.

Here I get into the troule,and have no ideal of repairing the remote problem.Search the information about this topic,I try to find the reason by exclusive method.

Disconnect the identify coil, trouble still exist.

Remove the dash,disconnected two connectors,found the DTC B1000 disappeared.Here it suggested that it most likely the dash result in remote trouble.So I asked the owner

This Post: Honda CRV 2010 Remote Trouble Repair From ChinaOBD2 Official Blog
Please keep this link if you copy the post!