Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation
To ensure proper use of the Hitachi Excavator Heavy Duty Diagnostic Tool, follow these steps:
1. Disable Antivirus and Firewall Software
Before connecting the diagnostic tool, disable any antivirus software and firewall on your laptop. These can interfere with the diagnostic tool’s operation.
2. No Software Installation Required
The diagnostic tool comes pre-configured, so no additional software installation is necessary.
3. Setting Up and Connecting the Tool
Shortcut Creation and Launching the Tool:
Ensure you have a shortcut named MPDr on your desktop.
Double-click the MPDr shortcut to open the diagnostic software.
Connecting to the Excavator:
Connect the diagnostic tool to the excavator’s diagnostic port using the appropriate cable.
Start the ignition on the excavator but do not start the engine.
Selecting the Correct COM Port:
In the diagnostic software, select the correct COM port that matches the connection of the diagnostic tool to your laptop.
Ensure the COM port is correctly identified for proper communication between the tool and the excavator.
4. Using the Diagnostic Tool
Follow the on-screen prompts in the MPDr software to perform diagnostics.
You can read fault codes, run system tests, monitor live data, and perform system calibrations.
Additional Information
For more details and troubleshooting tips, visit www.obdii.shop or contact customer support at .
No related posts.
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!