This instruction show you guide on how to adjust mechanical and hydraulic steering limiters for Grove GMK 3050 crane.
Related Contents:
Grove Crane Full Set Manual Download PDF Download
Grove Crane Full Shop Manual PDF Download
Instructions for the adjustment of the mechanical steering limiters
1.The crane should be completely lowered with the suspension controls and the axle blocking should then be engaged.
2.The crane should then be raised with the outriggers until the wheels are clear of the ground.
3.The mechanical stops should be screwed in (clockwise).
4.Turn the wheel on to a full lock; observe a minimum clearance of 20 mm between the tyre and chassis.
5.With the wheel in this position, adjust the lock stops to maintain the 20-mm minimum clearance.
6.Turn to the opposite lock and repeat steps 4 & 5.
7.Make sure that the steering cylinders have a minimum reserve stroke of 5 mm, once the above adjustments are completed. If necessary, the installation of the cylinders must be corrected to maintain the reserve stroke.
Instructions for the adjustment of the hydraulic steering limiters
1.The straight-ahead position is to be checked before making any other adjustments.
2.The crane is raised as described in 1 & 2 above. The axles must be in the
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!