UOBD2 released three new GODIAG VAG Test Platforms for VW, Audi, Seat and Skoda IMMO dashboard offline diagnosis, instrument IMMO data reading and writing, instrument mileage repair, and key matching…
1.GODIAG GT112 Test Platform
The GODIAG GT112 K-Line Test Platform Cable is designed for:
Offline key and IMMO instrument synchronization testing.
Emergency start area sensing detection for intelligent IMMO systems.
Offline diagnosis of IMMO dashboards.
Reading and writing IMMO data, mileage repair, and key matching.
Supports VW, Audi, Skoda, Seat (2nd & 3rd generation models) and more.
2.GODIAG GT111 Test Platform
The GODIAG GT111 Test Platform Cable features POGO PIN technology for:
Offline data reading and writing.
Key and IMMO instrument synchronization testing.
Intelligent IMMO system emergency start area sensing detection.
Offline diagnosis of IMMO combination instruments.
IMMO data reading and writing, mileage repair, and key matching.
Compatible with VW, Audi, Skoda, Seat, and other models.
3.GODIAG GT110 Test Platform
The GODIAG GT110 Test Platform Cable is optimized for VW, Audi, Skoda, and Seat CAN-Bus UDS 4th Generation IMMO Systems and features:
POGO PIN data reading and writing for UDS dashboards.
Dashboard key programming, including Boot Probe functionality.
Displays current voltage and current readings.
Includes a power switch, simulation ignition switch, and buzzer for ignition prompts.
Supports CANH UDS communication indication, CR2032 remote key battery detection, key and IMMO synchronization testing, emergency start sensing, offline diagnosis, IMMO data reading/writing, mileage repair, and key matching.
Each platform is a versatile and efficient tool for automotive diagnostics and repair!
All GODIAG VAG Test Platforms be used with devices like HEX V2, VAGCOM VCDS 5053, VAS5054A, VAS6154, SUPER VAG K+CAN, OBDSTAR, Lonsdor, AVDI, ZEDFULL, VVDI2, Key Tool Plus, X300 DP Plus, SUPER VAG, AUTEL, etc.
How to use GODIAG GT110 with POGO PIN?
Connect the power supply [Note: the power switch must be off].
Press the IGN ignition power [the IGN ignition switch must be turned on].
Connect the instrument plug.
Find the POGO PIN connection point of the corresponding instrument and connect it with a probe.
Turn on the power switch for about 3-5 seconds. As long as the instrument ABS light is flashing, it means that the POGO PIN read and write mode has been entered.
GODIAG Test Platform Features:
1.POGO PIN Data Reading and Writing:
Enables precise and secure data access to the dashboard.
2.Offline Dashboard Connection:
Converts the dashboard connection to standard OBD2 for easier diagnostics.
3.Key Chip and Instrument Synchronization Testing:
Ensures smooth operation between key and IMMO systems.
4.Independent Power Switch:
Allows for safe and controlled power management.
5.Simulated Ignition Switch:
Facilitates testing of ignition-related functions.
6.Current Voltage Display:
Monitors the operating voltage in real-time.
7.CR2032 Key Battery Detection:
Identifies the status of remote key batteries.
8.Current Display:
Shows the working current of the instrument.
9.CANH UDS Communication Indicator:
Confirms communication with UDS systems.
10.Key Induction Adapter with Indicator Light:
Helps detect and locate key emergency start sensing areas.
11.Stable POGO PIN Design:
Durable and safe, it avoids damage to cables during use.
How to detect IMMO system emergency start area?
Press the vehicle’s start button and position the device’s key identifier near a specific area.
If the key identifier light flashes or lights up, this indicates the vehicle’s key emergency start sensing area.
For smart keys with low or no battery, place the key in this area to start the vehicle.
How to detect Car IMMO Start and Key Chip?
Test the synchronization between the vehicle’s IMMO system and key chip.
Test Results Analysis:
Flashing Light (then off): Indicates proper functioning of both the IMMO chip and chip key.
Continuous Flashing Light: Indicates a mismatch between the chip key and the IMMO system. The key needs reprogramming.
No Flashing Light: Suggests a fault in the vehicle’s IMMO system. Further diagnosis of the IMMO system is required.
These features make GODIAG Test Platforms indispensable tools for automotive electronics professionals!
Get the GODIAG VAG Test Platform Bundle Package for just $88 during the 11.11 Crazy Sale! Don’t miss this limited-time offer!
https://www.chinaobd2.com/vp-godiag-test-platform-cables-for-vag.html
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!