Skip to content
Menu
OBD2 Scanner Blog
  • Home
  • Car Diagnostic Tool
    • MB Star Diagnosis
    • BMW Diagnostic Tool
    • GM Tech2
    • Volvo Vocom Interface
  • OBD2 Code Scanner
    • VXDIAG
  • Tech Support
OBD2 Scanner Blog

GDS2200 CE Operating System Update Procedure

Posted on February 24, 2019May 22, 2023 by VCDS

Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation

Double click GDS2200_Installer.exe to start the installation. If an OS update is needed, you will need approximately 30 minutes. Choose Yes when you see the following prompt:

GDS2200 CE Operating System Update Procedure

Follow the on-screen instructions. This is Step 1. (Subsequent updates may not need to perform this step; if this is the case, then the process will begin at step 2.)

NOTE: These instructions are available in the appendix at the end of this document.

GDS2200 CE Operating System Update Procedure

 

While step 1 of the operating system update is in progress, the bar graph shows the current status. This Bar graph will complete two times; when this has completed for the second time and the progress bar is no longer moving the HDS tablet tester requires

REBOOTING! Reboot the tablet tester.

GDS2200 CE Operating System Update Procedure

This is step 2.

NOTE: These instructions are available in the appendix at the end of this document.

GDS2200 CE Operating System Update Procedure

While step 2 of the Operating System update is in progress, the bar graph shows the current status. This bar graph will complete two times.

GDS2200 CE Operating System Update Procedure

After the bar graph has complete two times the Teradyne Diagnostic Solutions screen will appear for approximately 4 minutes. Do not touch the Tablet screen or undock the Tablet during this screen.

GDS2200 CE Operating System Update Procedure

This is Step 3.

The tester will reboot automatically. It may take up to 2 minutes for the reboot to complete.

When the tester has rebooted, the following screen will be displayed.

GDS2200 CE Operating System Update Procedure

After approximately 2 minutes, the tester will be rebooted again. This reboot may take up to a further 2 minutes to complete, during which time the following screen will be displayed.

GDS2200 CE Operating System Update Procedure

Once the Operating System has been successfully installed, click Finish.

GDS2200 CE Operating System Update Procedure

The HDS software will automatically load. Follow all screen prompts carefully.

Readers who read this article also read:

  1. Aftermarket Honda HDS Multiplatform Software Installation
  2. Ford F150 2013 SYNC Navigation Upgrade Instructions
  3. How to update BMW iDrive Software
  4. How to Update Audi MMI Map
  5. How to update Audi MMI 3G Firmware

 

  • Honda Diagnostic Software
GDS2200 CE Operating System Update ProcedurePreviousCarly BMW Register Battery for BMW F10 535i 2011

GDS2200 CE Operating System Update Procedure

 

How useful was this post?

Click on a star to rate it!

Average rating / 5. Vote count:

This Post: GDS2200 CE Operating System Update Procedure From ChinaOBD2 Official Blog
Please keep this link if you copy the post!

Tags: Ford HDS Honda tablet

Post navigation

Prev: Prev: Honda HDS System USB-to-serial adapter
Next: Next: How to Change BMW 6NH to 6NS by E-sys

Related Posts

Ford Focus Cruise Control CCF Programming by FCOM

Ford Focus Cruise Control CCF Programming by FCOM

2019.05.31

Honda Odyssey 2016 All Key Lost Programmign by Autek iKey820

Honda Odyssey 2016 All Key Lost Programmign by Autek iKey820

2023.06.10

JMD Super Remote Frequently Answer Questions

JMD Super Remote Frequently Answer Questions

2019.03.25

Volvo Truck Diagnostic Tools

Volvo Truck Diagnostic Tools

2024.01.28

Best Quality VCM II Diagnostic Tool With WIFI Function for Ford V98

Best Quality VCM II Diagnostic Tool With WIFI Function for Ford V98

2018.12.17

How to Decode Ford M Series Radio Password

How to Decode Ford M Series Radio Password

2023.04.4

PCMtuner tutorial: Download Setup

PCMtuner tutorial: Download Setup

2023.04.13

Ford Mustang 2017 TPMS Sensor Learning by Launch X431 Pro

Ford Mustang 2017 TPMS Sensor Learning by Launch X431 Pro

2023.04.3

Honda 2020 EPC Spare Catalogue Installation Guide on Win 7 Win 10

Honda 2020 EPC Spare Catalogue Installation Guide on Win 7 Win 10

2020.08.5

2019 Latest CNC key cutting machine introduction

2019 Latest CNC key cutting machine introduction

2019.02.25

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Recent Posts

  • Caterpillar C9 Engine Injection Actuation Pressure Output Fault Solution
  • OBDSTAR ECU Flasher Software Gets a Major Upgrade in June 2025
  • How to Remove HV Battery Cooling FAN for HINO Truck with J05E Engine
  • How to Calculate BMW F/G Series by APPRO2 for Free?
  • ECUDESK Software ECU Support List Update (2025.07)

Recommend OBD2 Scanner

ME9.7 ECU Engine Computer ME9.7 ECU Engine ComputerTabScan T6PT3G Diagnosis VCI for Porsche Diagnostic Tool Porsche Diagnostic Tool

Recent Comments

  • amr on MAN EOL Flash File Editor + MAN Immo Calculator Free Download
  • Pasquale Greenwald on Jungheinrich ETM/V 10-12 Tightening Torque for Screwed Connection on Brake Systems
  • VCDS on Scania SDP3 2.53.1 Diagnosis & Programming Free Download
  • Crossley on What are the functions of Iprog+ Programmer?
  • Lukas on VAG EDC15 EDC16 IMMO OFF Software Free Download

Archives

Categories

  • BMW Diagnostic Tool
  • Car Diagnostic Tool
  • Key Cutting Machine
  • Key Programming Tool
  • MB Star Diagnosis
  • OBD2 Code Scanner
  • Tech Support
  • VXDIAG

Tags

adapter Auto Pick and Decoder Car Key Copy Car Key Programmer cat Code Reader diagnostic software ECU Chip Tunning ecu programmer Ford gm handy baby Handy Baby 2 Key Programmer Handy Baby II Key Programmer HEX V2 immo iprog key Key Pro key programmer laptop Launch lish LISHI new arrivals nexiq nexiq link diesel truck interface nexiq truck diagnostic NEXIQ USB Link OBD2 obdii original program Scania VCI smart VAG COM Cable VCDS VCDS Cable VCDS VAG COM Cable vci VW wholesale X-PROG Box X-PROG Box ECU Programmer XPROG-M

Hot Selling

  • ME 9.7 ECU Engine Computer
  • MINI VCI J2534
  • NCF29XX Programmer
  • ThinkTool Pros+

Links

  • China OBD2
  • EPS Foam Machine
  • Foxdiag
  • Сканер OBD2
©2025 OBD2 Scanner Blog | Powered by chinaobd2