FoxFlash ECU Programmer new update on Jan.2023, added NEW DRIVERS TO EXTRACT PASSWORDS FROM FILES, TCU TEMIC 6T50 OPEL/CHEVROLET, AUDI VW Group TCU DQ250C/E/F OBD virtual read/write-BENCH Read&Write, Toyota Denso Gen1 (76F00xx) OBD read/write, New Protocols for Bentley Skoda, BMW MSV90 Protocols BOOT Mode,and Delphi DCM6.2AP DCM6.2A DCM6.2C DCM6.2V.
FoxFlash detail update information: (The update will auto sync from the server to your side)
EXTRACT PASSWORD FROM FILE
– NEW DRIVERS TO EXTRACT PASSWORDS FROM FILES
New utilities useful for extracting the password by loading a Tricore processor file.
As of now, the software will also save the tricore password locally for each Tricore processor reading.
– Complete reading and writing of Micro,
– Complete reading and writing of EEPROM,
– Cloning,
– RIVERGIN function
With this update you will be able to fully read and write the following ECUs directly
from pinout without having to open them:
– VAG GROUP VW-AUDI-SEAT-SKODA: MED17.5.21, MED17.5.25
– FORD: MED17.0.7
– NISSAN: EDC17 C84
– RENAULT: ME17.9.20, EDC17 C84
– TOYOTA: MED17.9.52, EDC17 C47
January 26, 2023
FoxFlash Can Support AUDI VW Group TCU DQ250C/E/F OBD virtual read/write-BENCH Read&Write
FoxFlash is now able to perform the following operations:
OBD Virtual Read
OBD Write
BENCH Read
BENCH Write
On the following TCUs:
Temic DQ250C
Temic DQ250E
Temic DQ250F
Vehicles concerned:
AUDI/SKODA/VAG 2.0 TSI/TFSI
AUDI/SKODA/VAG 2.0 TDI CR
FoxFlash is now able to perform the following operations:
OBD Read
OBD Write
On the following ECU reference:
Denso Gen1 (76F00xx)
Hino 4.0 VVT-i 147ch
Lexus/Toyota 2.5 205ch
Lexus 200H (1.8 E-CVT) 99ch
Lexus 220d 177ch
Lexus 250 (GSE20) 200ch
Lexus 300 (3.0 V6) 204ch
Lexus 330 (3.3 V6) 230ch
Lexus 350 (3.5i V6) 275/300ch
Lexus 400h (3.3i V6) 272ch
Lexus 430 290ch
Lexus 450h (3.5i V6) 292/299ch
Lexus 460h (4.6 V8) 247ch
Lexus 600h (5.0 V8) 394ch
Toyota 1.0 (1KR-DE) 64ch
Toyota 1.3 VVT-i 87/100ch
Toyota 1.6 VVT-i 132ch
Toyota 1.8 VVT-i HSD/TS 99/129/133ch
Toyota 2.0 (1AZFE) 145ch
Toyota 2.0 D4-D 116/126ch
Toyota 2.0 DOHC 16v 156ch
Toyota 2.0i 150ch
Toyota 2.2 D4-D 136/150/177ch
Toyota 2.4 (2AZFE) 160ch
Toyota 2.5 205ch
Toyota 2.5 D4-D 101/125/144/150ch
Toyota 2.7i 161/188ch
Toyota 3.0 D4-D 172ch
Toyota 3.5 (2GRFE) 270ch
Toyota 3.5i V6 266ch
Toyota 4.0 V6 239/249/260/273ch
Toyota 4.3 VVT-i 300ch
Toyota 4.5 D4-D 272ch
Toyota 4.5 V8 D4-D 198ch
Toyota 4.6i VVT-i D-45 314ch
Toyota 4.7 V8 280/288ch
Toyota 5.0 VVT-i 295ch
Toyota 5.7i VVT-i D-45 286ch
Lexus GS 300
Lexus GS 350
Lexus IS-F
Toyota Prius
Toyota RAV 4
Toyota Sequoia
Toyota Tacoma
Toyota Tundra
Toyota Verso
Toyota Auris
Toyota Auris
Toyota Avensis
Toyota Camry
Toyota Corolla (Verso)
Toyota Crown
Toyota Dyna
Toyota Estima
Toyota FJ Cruiser
Toyota Fortuner
Toyota Hilux
Toyota Land Cruiser
Toyota Mark X
Toyota Optimo
ECU UPDATE New Protocols for Bentley Skoda (BOSCH )
Today we added multiple protocols for Bentley, Skoda, Honda, Volvo, etc. More info on supported ECUs and cars can be found below.
SUPPORTED CONTROL UNITS & VEHICLES
BENCH /BOOT/OBD
BOSCH
BAIC Bosch ME17.8.8 TC1728: Senova x25 1.5 VTI (2016), Senova X35 1.5 VTI (2016) , BJ20 1.5 VTI (2016)(BOOT)
Honda Bosch ME17.9.55 TC1724: City/Jazz/BRIO/FIT 1.2L i-VTEC (2014)(BOOT)
Mahindra Bosch EDC17C53 TC1767: XUV500 2.2 CRD (2014)(BENCH BOOT)
Bentley Bosch MG1CS163 TC298: Continental GT W12 6.0 (2018)(BENCH)
Volvo Bosch EDC16C34 MPC562: V70/S80 1.6D (2010)(OBD BENCH JTAG)
Skoda Bosch MED17.1.27: Fabia 1.0 TSI (2017)(OBD BENCH BOOT)
Bentley Bosch MED17.1.62: Bentayga W12 6.0 (2016)(BENCH BOOT)
BMW MSV90 Protocols BOOT Mode
This time it is for BMW cars with Siemens MSV90 TC1796 ECU. More info on supported cars can be found below.
SUPPORTED CONTROL UNITS & VEHICLES
BOOT
SIEMENS
MSV90 TC1796
CARS:
BMW 5 Series F10 – 530i N53B30A/N52B30B
BMW 5 Series F11 – 530i N53B30A/N52B30B
BMW 7 Series F01 – 730Li N52B30A/N52B30B
BMW 7 Series F02 – 730Li N52B30A/N52B30B
BMW X3 Series F25 – 28i xDrive N52B30A/N52B30B
Delphi DCM6.2AP DCM6.2A DCM6.2C DCM6.2V
FoxFlash is now able to perform the following operations:
DCM6.2A/C/V
OBD Read
OBD Write
JTAG_BOOT
DCM6.2APJTAG_BOOTOn the following ECU reference:
Hyundai
Audi
Citroen
Fiat
Kia
MAN
Peugeot
VW
Toyota
Ssangyong
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!