This article show the procedures on how to use FCOM to configure/program Ford Focus cruise control unit.
Preparations:
FCOM Ford OBD2 Diagnostic Software Download
How to Install FCOM Diagnostic Software on Window/Linux
Ford Vehicle Mode Covers:
Ford Focus 2010- ,Ford C-Max 2010-, Ford Fiesta 2008-, Ford Transit 2006-,Ford Transit Custom 2013-, Ford Transit Connect 2013-,Ford Mondeo 2006-2015, Ford Galaxy 2006-2015,Ford S-Max 2006-2015
Procedures:
Select “Settings” in the Miscellaneous functions
Tick “Development functions” and then click “Save Changes”
Click “Select Control Unit”
Select “BCM-Body Control Module”,then click “Go” to continue
It will take several seconds to build communication to BCM
Select “Configuration”
Select “Control Unit Configuration”,then click “Go” to continue
Communication in progress…
Select “Cruise control”,then click “Edit”
Select “Present” option,then click “Continue”
Click “Write configuration” to ECU
It will prompt you with below massage,please click “Yes” to continue
Communication in progress…
Programming configuration…
Configuration was successfully
Done!
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!