KT200 ECU Programmer Siemens SIM2K-140/141/341/D160 on the desktop (large connector) :
1,3,5 – ECU Ground (just connect one of the contacts)
77 – CAN-High
78 – CAN-Low
76 – K-Line
2 – + 12V (ignition on)
4 – + 12V (main relay power supply)
6 – + 12V (unswitched power)
64 – output of the main relay control
Note that when working with the SIM2K-140/141/341 / D160 on the desk, it is absolutely necessary to connect the relay via the control output of the main relay (64th computer contact). Otherwise, the firmware recording operation may not succeed.
Siemens SIM2K-241 on the desktop (smaller connector) :
1,2,4 – ECU Ground (just connect one of the contacts)
77 – CAN-High
60 – CAN-Low
3,5,6,75 – + 12V (main relay power supply)
41 – + 12V (ignition on)
58 – + 12V (unswitched power)
53 – output of the main relay control
KT200 ECU Programmer tech support:
https://www.chinaobd2.com/
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!
Tags: abs ECU Program ECU Programme
Related Posts
How to Solve “WAIT INTERNET CONNECTION” Error for KT200 ECU Programmer ?
2024.01.28
How to Use FCOM Diagnose Vehicles
2019.05.31
How to use EUCLEIA TabScan S8 for car’s service reset function?
2019.03.27
2019 Latest ATMEGA64 Repair Chip Update Software for XPROG-M Programmer V5.0/V5....
2019.02.26
How to Use FORScan:Manual,Reviews,Download
2019.03.7
Cheap BMW OBD2 reader reviews: Autel AP200, INPA, ISTA / P, Foxwell NT530, C110
2019.12.24
What’s the difference of XPROG-M V5.84 X-PROG Box ECU Programmer and XPROG...
2019.02.26
Mercedes Benz W204 Steering Wheel Airbag Removal Guide
2019.02.28
How to do BMW ECU Validation Service with BMW ICOM ISTA ?
2024.01.28
2019 Latest Version iProg+ Programmer V76 Software Free Download
2019.08.7