CNH EST diagnostic software will prompt you to update firmware if your CNH DPA5 adapter firmware with old version when you connect it to PC and machine.So here chinaobd2.com show you guide on how to update firmware for CNH DPA5 adapter.
Preparations:
2022 New Holland Electronic Service Tools 9.6 9.2 CNH EST Software Free Download
CNH DPA5 Diagnostic Kit
Procedures:
Notice:Only high quality CNH DPA5 adapter support firmware update,some fake version can not update,it will prompt error during updating.
Below picture show high quality CNH DPA5 adapter PCB
This software in your DPA5 protocol adapter must be updated before you can use the EST.
This will take about two minutes to complete.The EST will restart automatically after the update
Please click on OK to update the DPA5 now.
Now update processing
Do not disconnect power until update is completed.
Your firmware has been successfully updated.
You may now reconnect to your application
CNH EST diagnostic software show hardware and software version information after updating.
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!