Clark ISUZU 4LE2 Tier-4 Engine Fuel Supply Pump Removal Guide

This instruction show you steps on how ot remove fuel supply pump for Clark machine with ISUZU 4LE2 Tier-4 engine.

 

Related Contents:

ISUZU E-IDSS 2022 2019 Engine Diagnostic Service System Free Download

ISUZU IDSS Diagnostic Tool

 

Procedures:

1Battery Ground Cable Disconnect

1 Disconnect the battery ground cable from the battery.

 

2 Cooling Fan Removal

1 Remove the cooling fan from the fan pulley.

 

3 Cooling Fan Belt Removal

1 Remove the cooling fan belt from the pulley.

Note: Loosen the generator adjust bolt and remove the belt.

 

4 Fan Pulley Removal

1 Remove the fan pulley from the water pump assembly.

 

5 Generator Removal

1 Disconnect the harness connector from the generator.

2 Remove the generator from the generator bracket.

3 Remove the adjust plate from the water pump assembly.

Note: The diagram shows the 24 V

This Post: Clark ISUZU 4LE2 Tier-4 Engine Fuel Supply Pump Removal Guide From ChinaOBD2 Official Blog
Please keep this link if you copy the post!