Cat ET 2024A Engine Speed Test function allows you to change the engine speed to be changed, except for high and low idle, which is useful to measure noise level.
Related Contents:
Caterpillar ET 2024A 2023A 2018A Electronic Technician Software Free Download
CAT Communication Adapter 3 478-0235
Caterpillar Factory 18 Digits Password Service
Accessing
To run the Engine Speed Test function, select “Diagnostics Test” from the Diagnostics menu, and then select “Engine Speed Test” from the submenu. The Engine Speed Test screen is displayed.
Screen Layout
The Engine Speed Test screen has the following areas:
Status Line
The Engine Speed Test status line displays messages regarding the process of the diagnostic test.
Instruction Area
The Engine Speed Test instruction area describes the step-by-step procedure for the diagnostic test.
Control Area
The Engine Speed Test control area the engine speed to be increased or decreased. The horizontal slide bar displays the parameter range. The engine speed value is above the slide bar. The parameter reference numbers are to the left and right of the slide bar. A vertical slider indicates where the current value falls. The buttons used in this area are:
– Click to decrease the engine speed by one speed dial setting
– Click to decrease the engine speed by 20 RPM
– Click to increase the engine speed by 20 RPM
– Click to increase the engine speed by one speed dial setting
CAT ET 2024A
Buttons
Depending upon the calibration, the buttons available are:
Start – Click this button to begin the test. The engine speed can then be manipulated manually with the arrow buttons underneath the slider bars. After this button is clicked, it is disabled until the test is stopped
Begin Sweep – Click this button to vary engine speed through the range automatically. The sweeping continues back and forth until the End Sweep button is clicked
End Sweep – Click this button to stop the sweeping of the engine speed.
Stop – Click this button to end the test. This button is disabled until the test is started.
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!