Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation

What is Caterpillar ET?
Caterpillar Electronic Technician (Cat ET) is diagnostic software required to communicate, diagnose and service electronically controlled Caterpillar engines and machines. When connected to an Electronic Control Module (ECM), a technician has the ability to diagnose existing and potential problems, configure the product, and obtain data for analysis.
Caterpillar ET Functions List:
1.View active and logged diagnostics.
2.View events where irregularities occurred and were logged by the ECM.
3.View the status of a group of parameters (temperatures, pressures, etc.) simultaneously.
4.Record and log performance data.
5.Graph a group of status parameters.
6.View the current configuration of an ECM.
7.Change ECM configurations.
8.Perform diagnostic tests.
9.Perform calibrations.
10.Print reports and diagnostic results.
11.Please keep in mind that some ecm settings for example, speed limit requires factory password. The factory password generator is not included in this application
Caterpillar ET Support Languages:
English,Chinese,Danish,French,German,Italian,Portu guese,Spanish
Caterpillar ET Support OS:
Window 7,Window 8,8.1,Window 10 32 bit and 64 bit
PC Requirements
Recommended Configurations
PC containing a 2.0 GHz dual-core processor
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!
Tags: cat diagnostic software lish
Related Posts

How to install v17.04.27 wiTECH Micropod 2
2023.12.31

Delphi DS150E Change Instrument/Dashboard Language for Audi A3
2019.03.12

How to Setup Zed-NET for Zed-Full for Internet Work
2019.07.24

How to choose CG ECU Programmer?
2023.04.1

JCB StageV Tier4 Air Filter Pressure Sensor Active at Init State
2023.10.4

Delphi DS150E Diagnose Audi A3 2009 Gateway Real-time Data
2019.05.31

How to use gm tech2
2024.01.28

CG FC-200 V1.1.2.0 Update
2023.04.8

Super VAG K+CAN V4.6 With Multi Language
2018.12.17

Ford Focus Cruise Control CCF Programming by FCOM
2019.05.31