Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation
Question:
Is it possible to correct mileage on VW MQB 5C cluster by CG100X?
Here is the answer:
Yes. The CGDI official newly released an upgrade notice:
CGDI CG100X Programmer will add MQB 5C cluster mileage correction.
R7F701401
R7F701402
R7F701407
Need D1 adapter and remove capacitors.
It will support both 5A and 5C clusters soon!
But before upgrading, you can only correct mileage on VAG MQB 5A D70F34xx, D70F35xxx, and R7F7014xx dashboards. Working with the CG100X D1 Adapter, No soldering! No lift pin! Security decryption, stable operation! (Do not extend the wire harness of the D1 Adapter)
Stay tuned!
Tips to identify MQB 5C and 5A Cluster:
Locate the chip on the board and determine its silkscreen
If it starts with “EM” on the silkscreen, it is a 5A meter.
If it starts with “PCJ” on the silkscreen, it is a 5C meter.
CG100X VW MQB 5A Dashboard Support List:
(Incl.VW 5C Dashboard and Chip List)
CG100X with D1 Adapter Change VW MQB D70F34XX/D70F35XX Mileage:
CG100X Correct Mileage for VW MQB48 5A R7F7014xx:
www.chinaobd2.com
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!