BMW X5 and X6 Round Vision Retrofit Guide

Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation

This installation instructions show a guide on how to perform BMW X5 and X6 (E70 and E71) round vision retrofit guide.These installation instructions only apply to cars with retrofitted BMW ACM accessories menu.

And for more BMW retrofit,you can check here:BMW Retrofit Projects

On cars without ACM, the installation instructions 01 29 0 417 584 (Rear View) and/or 01 29 0 418 007 (Side View) must be used.

Retrofit kit no.:

66 21 0 442 573 Round Vision Retrofit with 2 cameras

66 21 0 445 720 Round Vision retrofit kit with 4 cameras

Installation time

The installation time is approx. 2.5 to 3.0 hours. This may vary depending on the condition of the car and the equipment in it.

Important information

These installation instructions are primarily designed for use within the BMW dealership organisation and by authorised BMW service companies.

In any event, the target group for these installation instructions is specialist personnel trained on BMW cars with the appropriate specialist knowledge.

All work must be completed using the latest BMW repair manuals, circuit diagrams, servicing manuals and work instructions, in a rational order, using the prescribed tools (special tools) and observing current health and safety regulations.

If you experience installation or function problems, restrict troubleshooting to approx. 0.5 hours for mechanical work and 1.0 hour for electrical work.

In order to reduce costs and avoid any additional expense, send a query immediately to the Technical Parts Support via the Aftersales Assistance Portal (ASAP).

Specify the following information:

This Post: BMW X5 and X6 Round Vision Retrofit Guide From ChinaOBD2 Official Blog
Please keep this link if you copy the post!

Tags: camera