This show the guide on how to install &retrofit BMW X3 angel eyes.I will introduce the procedure step by step with picture and text.Hope this article will bring some enlightenment to your own work.
Procedures of BMW X3 Angel Eyes Installation & Retrofit:
Step 1 is to obtain a good power source for the Angel Eyes. Below is a picture of the ECU. Here I tapped into the accessory power supply. This is what makes the angel eyes light up when the key is turn to position 2.
Relay, 12V power and ground.
Everything wired. Fingers crossed. It works!
Back of headlights
Everything removed from headlights.
I was scared shitless during this part. Headlight housing
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!