Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation
BMW S1000RR HP4 Race is a sport bike initially made by BMW Motorrad to compete in the 2009 Superbike World Championship, that is now in commercial production.BMW S1000RR HP4 price about $78000,here UOBD2 share the guide on how to program new keys for BMW S1000RR HP4 all key lost programming.
Devices You Need:
KTAG V2.25 EU Online Version
Original TMPro 2 Programmer
Note:Optional BDM Frame for KTAG/KESS V2/Fgtech
Main Procedures:
Step 1:Read Out ECU Data
Locate ECU,it is near the oil tank.And remove it from BMW HP4.
Remove the ECU cover,here is a article about ECU cover removal: How to open EDC16 / EDC17 / MED17 / etc
Then use KTAG adapter and BDM Frame to build connection between BMW S1000RR HP4 and KTAG.
After then,run KTAG software:
Choose P188 protocol,then click read
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!
Tags: adapter cat EDC17 KESS key key cutting machine KTAG laptop OBD2 program
Related Posts

Jeep Cherokee Powertrain Control Module PCM Initialization Guide
2019.05.14

PCMFlash Review: Possible to read VAG MED17 EDC17
2019.03.5

VAS 5054A Firmware Update (esp. for bad BT module)
2019.09.24

How to choose CG ECU Programmer?
2023.04.1

OBDSTAR X300DP Plus Review: Endoscope Function Still Work
2023.03.8

Iveco AlphaNumeric Code Calculator v0.1 Free Download
2019.05.14

How to Update Original & Crack wiTech Chrysler Diagnostic Software
2019.07.24

MAN MANTIS EPC Electronic Parts Catalogue Free Download
2019.07.31

ODIS S Diagnostic Software vs. VCDS
2024.01.28

How to Use ECUsafe EGR/DPF/FAP Removal Software
2019.02.24