Skip to content
Menu
OBD2 Scanner Blog
  • Home
  • Car Diagnostic Tool
    • MB Star Diagnosis
    • BMW Diagnostic Tool
    • GM Tech2
    • Volvo Vocom Interface
  • OBD2 Code Scanner
    • VXDIAG
  • Tech Support
OBD2 Scanner Blog

BMW ICOM (Integrated Communication Optical Module) Diagnostic Tool

Posted on June 10, 2019June 10, 2019 by VCDS
BMW ICOM A1

Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation

What is BMW ICOM?

BMW ICOM (Integrated Communication Optical Module) is the data interface to the vehicle and is the successor to OPS (Optical Programming System) and OPPS (Optical Testing and Programming System). OPS and OPPS are not supported by ISTA/P. Three different ICOM interfaces are available, with which all BMW Group vehicles can be processed.

BMW ICOM A Module

BMW ICOM A1

1 Network Connection

2USB Port

3 OBD Connector

Connecting ICOM to OBD socket

Plug the OBD connector on the ICOM A into the OBD socket on the vehicle. Then connect the ICOM A to the workshop network using the network connector. The OBD connector on the ICOM A can be angled, allowing it to be adjusted for OBD sockets at different installation locations in the vehicle.

BMW ICOM A2 Module

BMW ICOM A2

BMW ICOM B Module

BMW ICOM B

4 MOST Connector

5 USB Port

Using ICOM at MOST direct access port

Also use the ICOM B module to connect the ICOM to the vehicle MOST direct access port. For this purpose, connect the USB ports of ICOM A and of ICOM B with the USB cable. Then connect ICOM A to the workshop network via the network connector.Connect ICOM B via the MOST connector to the MOST direct access port of the vehicle and plug the OBD connector of ICOM A into the OBD socket on the vehicle.Repeat the procedure if the MOST connection or ICOM is not recognized.

BMW C Module

BMW ICOM C

6 Connector for OBD port

7 Diagnosis head connector

Using ICOM at 20-pin diagnosis plug

Use the ICOM C module to connect the ICOM to the 20-pin diagnosis plug on the vehicle. For this purpose, plug the OBD connector into the OBD port on the ICOM A and connect the diagnosis head connector to the 20-pin diagnosis plug on the vehicle.

BMW ICOM Software Download:

BMW INPA Software Free Download

BMW Rheingold ISTA-D & ISTA-P Free download

BMW E-sys Coding Software Free Download

BMW Standard Tools 2.12 Free Download

BMW ICOM Related Contents:

BMW ICOM A1 A2 ISTA LAN WIFI Wireless Setting Guide

How to Configure BMW Rheingold ISTA With BMW ICOM

How useful was this post?

Click on a star to rate it!

Average rating / 5. Vote count:

This Post: BMW ICOM (Integrated Communication Optical Module) Diagnostic Tool From ChinaOBD2 Official Blog
Please keep this link if you copy the post!

Tags: BMW ICOM Software cat ICOM A2

Post navigation

Prev: Prev: Diamond Logic
Next: Next: How to Update Audi MMI 3GP (7T6) Navigation

Related Posts

How to Install Scania VCI3 Diagnostic and Programming Software Scania SDP3

How to Install Scania VCI3 Diagnostic and Programming Software Scania SDP3

2019.12.15

John Deere Service Advisor 5.3.225 (replaces 5.2) Offline 2023 Construction and Forestry Equipment

John Deere Service Advisor 5.3.225 (replaces 5.2) Offline 2023 Construction and ...

2024.01.28

BMW X3 E83 Steering Angle Calibration by Launch X431

BMW X3 E83 Steering Angle Calibration by Launch X431

2019.07.14

How to Remove and Disassemble Instrument Cluster for BMW Z3

How to Remove and Disassemble Instrument Cluster for BMW Z3

2019.05.31

How to Disable BMW X5 2013 N55 Oxygen Sensor Trouble Codes 2D22 2D13

How to Disable BMW X5 2013 N55 Oxygen Sensor Trouble Codes 2D22 2D13

2023.04.4

How to Install/Setup Volvo II 88890400 on Laptop

How to Install/Setup Volvo II 88890400 on Laptop

2024.06.7

How to install TIS2000 on Windows XP/7/8 64bit or 32bit

How to install TIS2000 on Windows XP/7/8 64bit or 32bit

2022.03.22

What is j2534 pass thru?

What is j2534 pass thru?

2019.06.3

QSK60 G CM2358 Fault Code 1367 Pre-Oil Filter Pressure Sensor Circuit

QSK60 G CM2358 Fault Code 1367 Pre-Oil Filter Pressure Sensor Circuit

2024.08.24

How to Do BMW ECU Validation Service with

How to Do BMW ECU Validation Service with

2024.01.24

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Recent Posts

  • Caterpillar C9 Engine Injection Actuation Pressure Output Fault Solution
  • OBDSTAR ECU Flasher Software Gets a Major Upgrade in June 2025
  • How to Remove HV Battery Cooling FAN for HINO Truck with J05E Engine
  • How to Calculate BMW F/G Series by APPRO2 for Free?
  • ECUDESK Software ECU Support List Update (2025.07)

Recommend OBD2 Scanner

ME9.7 ECU Engine Computer ME9.7 ECU Engine ComputerTabScan T6PT3G Diagnosis VCI for Porsche Diagnostic Tool Porsche Diagnostic Tool

Recent Comments

  • amr on MAN EOL Flash File Editor + MAN Immo Calculator Free Download
  • Pasquale Greenwald on Jungheinrich ETM/V 10-12 Tightening Torque for Screwed Connection on Brake Systems
  • VCDS on Scania SDP3 2.53.1 Diagnosis & Programming Free Download
  • Crossley on What are the functions of Iprog+ Programmer?
  • Lukas on VAG EDC15 EDC16 IMMO OFF Software Free Download

Archives

Categories

  • BMW Diagnostic Tool
  • Car Diagnostic Tool
  • Key Cutting Machine
  • Key Programming Tool
  • MB Star Diagnosis
  • OBD2 Code Scanner
  • Tech Support
  • VXDIAG

Tags

adapter Auto Pick and Decoder Car Key Copy Car Key Programmer cat Code Reader diagnostic software ECU Chip Tunning ecu programmer Ford gm handy baby Handy Baby 2 Key Programmer Handy Baby II Key Programmer HEX V2 immo iprog key Key Pro key programmer laptop Launch lish LISHI new arrivals nexiq nexiq link diesel truck interface nexiq truck diagnostic NEXIQ USB Link OBD2 obdii original program Scania VCI smart VAG COM Cable VCDS VCDS Cable VCDS VAG COM Cable vci VW wholesale X-PROG Box X-PROG Box ECU Programmer XPROG-M

Hot Selling

  • ME 9.7 ECU Engine Computer
  • MINI VCI J2534
  • NCF29XX Programmer
  • ThinkTool Pros+

Links

  • China OBD2
  • EPS Foam Machine
  • Foxdiag
  • Сканер OBD2
©2025 OBD2 Scanner Blog | Powered by chinaobd2