Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation
This article show a guide on how to reset BMW CBS via instrument cluster E90 E91 E92 E60 E61 E63 E64.
Before starting, the clock must be displayed on the instrument cluster before you hold down the set /reset button.
1.Turn ignition to Terminal 15.
2.Press and hold the Instrument Cluster Set/Reset button for 10 seconds.
3.The upper display in the Instrument Cluster will be illuminated with a Service Item (example: An oil can is the designation for Oil Service). The lower display in the Instrument Cluster will indicate the remaining time or mileage left for that Service Item.
Pressing the button repeatedly will allow the display to scroll through all of the Condition Based Service Items.
4.Press and hold the Instrument Cluster Set/Reset button again and the lower display screen will indicate
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!
Tags: cat
Related Posts

How to Program 2018 BMW 530LI xDrive G38 EPS by Launch X-431 Pad 7
2024.01.28

Five reasons why programmer chip programming is unstable
2023.06.4

How to Configure/Setup Adapter for Volvo PTT Premium Tech Tool
2019.03.18

BMWAiCoder 5.0 4.6 4.4 Free Download
2019.03.1

Xhorse Remote Tester V2 Operation Guide
2023.03.15

How to Update BMW ICOM/ICOM NEXT Firmware by Manual
2024.06.15

PACCAR Truck Rear Drive Axle Oil Temperature Gauge Inoperative Repair
2023.04.3

How Configure Connection Between Scania VCI3 & PC by Wireless
2023.04.4

Perkins EST Software Perform ECM Flash for 404F-22T Engine
2020.08.27

How to Use Bendix Acom Pro Virtual Truck Connection Function
2023.05.5